Tuesday 22 October 2019

How wrong can the weather forecast be

Monday 21 October 

The forecast on Sunday said high pressure was heading for the UK, it's going to be a dry week! Plans were laid to get out to Culvert 24A to crack on with the rebuild of the down side chamber and bask in the autumn sunshine. In the real world, it didn't quite turn out like that. Monday morning was wet and miserable, and with 6 of us in, finding something to do in the dry became the priority. Luckily, there was a task (on our list of 220 outstanding jobs) that has been waiting since early this year. That job is making moulds for casting the numerals for the milepost heads. That kept everyone busy for long enough to decide that the grey was getting lighter. Then we loaded up and headed off to Gretton, again by the scenic route as the road in Greet has been closed now ๐Ÿ˜– 

Number patterns in place, Roger cuts a divider 
Mould casing, more extra's than Ben Hur ๐Ÿ˜ƒ
(Photo: Alastair)  
We just have to wait and see it it works 

Moulds completed, we loaded up and moved out. Roger and Alastair headed to Culvert 24A to pick-up the rebuild work. Dave, Nigel and Andrew dropped off at Culvert 24C up side ditch to clear the vegetation. Stuart went to talk to the farmer about a report of flooding into the field from our outlet ditch. 

The barometric pressure is so high, the top of Bredon Hill has disappeared 
Setting up camp for the day 
Culvert 24A down side starting point 

The area around the south end of the tunnel has a tendency to be wet, the up side pond has started to fill 

Gretton Meadow up side pond 

Down at Culvert 24C... 

Culvert 24C up side ditch 
Dave starts in the middle 
Andrew attacks the culvert outfall 
Nigel cuts along the fenceline  
The gang working on Culvert 24C down side 
Now we have started work, Bredon Hill disappears 

Lineside clearance are working south from Working Lane bridge, this picks up at least 2 of the culverts 

What's left of Culvert 25B up side headwall 
Freshly cleared ditch 25B to 25A 
Clearance not reached Culvert 25C yet 
Spoke too soon, Bredon Hill's back 

Over in the adjacent field there's signs of seepage, but no flooding as yet 

Over the hedge near Culvert 24B 

After leaving the railway, the steam from Culvert 24C enters another pipe under the adjacent land and reappears in the next field to run in an open ditch. 

The end of the line for Culvert 24C 

Back at 24C a large ball of plastic netting has been recovered, this was dumped after the landslip repairs. It's gone to the skip at last. 

Break time
Culvert 24C outlet ditch after cutting 

Up at 24A down side, Roger is getting the walls levelled up 

Removing the old copings from the headwall 
Roger with a stock of imperial blues
(Photo: Alastair) 
Andrew and Dave head south
(Photo: Alastair) 
Culvert 24B down side
(Photo: Alastair) 
Culvert 24B Down side 
Culvert 24B Headwall with roots 
Culvert 24C up side outfall, no headwall 
Culvert 24C fenceline outlet 
Culvert 24C down side ditch after raking out 
Andrew climbing back up form Culvert 24C down side
Culvert 24C down side headwall, top course and copings need reseating 

Progress on 24A, all 4 walls have bricks on them, it needs another few courses yet  

Culvert 24A, crest drain headwall 
Culvert 24A, culvert pipe 
Culvert 24A, concrete backfill behind the outside wall  

That's it for today, by the time we loaded up, the Malvern Hills were visible, by then we were all wet ๐Ÿ˜’

Malvern in the distance 


1 comment:

  1. I was wondering how well all your work (culerts and drains cleared and exposed) had dealt with the down pours on Friday and Saturday Seems you had got much of the clearance of vegetation done just in time?

    Powli Wilson

    ReplyDelete